• How To Enable Cccam On Skybox F3

CCcam firmware for all OpenBox installtion / upgradation For those of you who for one reason or another, are experiancing difficulties adding clines, I have put together this basic tutorial showing how to add clines. First to download the attached test Cccam.cfg file Once unzipped open the file and overwrite the test clines with your own active clines, then save the changes. Now add the cccam.cfg file to a USB Stick, do not zip the file, add it as is. Then place the USB Stick that contains the cccam.cfg file, into the USB connector at the rear of the receiver. Now goto Menu - Network Local Settings and select CCcam Plug Setting and click the OK button Now select Update Files by USB and click the OK button. Now select CCcam,cfg CCcam Plug and click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything, and nothing will be installed. If there is no tick displayed, select CCcam,cfg CCcam Plug and click the OK button Once the tick is displayed, click the Yellow button.

How to install SoftCam.key into openbox If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Now select CCcam Plug Setting and click the OK button. Now select option 1.

CCcam.cfg and click the OK button. Now highlight each cline you wish to activate, by clicking the OK button, a tick will appear next to each cline you have activated. Finally check your Network Settings are configured correctly. If your router supports DHCP turn it ON and click Apply.

How To Enable Cccam On Skybox F3

If your router do not support DHCP you will be required to set it up manually, click Apply once you have set it up correctly Now reboot your receiver, and if all is okay, you may start viewing channels. How to setup skybox v6/v8/f3/f3s/f5 ease of set up about 5 – 10 simple when its all explained just like everything so i have done a little tutorial for you all to help people unsure on what to do, the box is HD upgradable via USB device. First off get yourself a blank usb device which must be formatted to fat32 by plugging into your pc, most of these boxes come with the image preloaded so all you will need to add is your favorite see lion, which is simple you put it on your usb and stick it in the front of the box. The pictures below will show you the rest of the story, if you dont have a hdmi tv you can use the composit cable and the scart adapter as shown below. This is the box the f3 comes in nice and compact. This is what you get in the box remote Hdmi cable power lead and book If you dont have a HDMI fitting on your TV you will need these composite to scart.